POWER SUPPLIES

For use with SERIES 210 stations
These units provide a safe low voltage regulated power for any network of the Series 210 intercom stations. Note, the DN800 '3-in-1' stations have their own built-in power supply.

Two models are available:

1. Standard model provides upto 1 Amp output, enough to power 4 headset stations (24 headsets) plus a supervisor's loudspeaker station.

2. Battery Standby 'Fail-Safe' model. This unit will provide standby battery backup power of 1.2 Amperes and keep a typical system going several hours.

All Series 210 units simply link to one another in a daisy-chain fashion. Distance between stations may be any length upto an overall maximum of 750 mtrs, though that may be extended with additional psu.


STANDARD PSU, APU210
Model APU210

The Standard model incorporates all standard features expected of modern high quality power supplies: regulated output with short circuit protection and shutdown on fault condition; safe low voltage (28v d.c. upto 1A).


110V.a.c. mains model: Pt.No. 210-30
240V.a.c. mains model: Pt.No. 210-31


fail-Safe PSU, 210-38
Model FSBPS

The Fail-Safe Battery Standby model provides fully automatic backup power in the event of mains supply failure. Visual and audible warnings are triggered when the supply fails, (this may be silenced) .

Return to mains source (with battery recharge) also takes place automatically upon the reinstatement of the supply. D.C. output is a safe low voltage 28v at 1.8A and upto 1.2A in battery backup mode.
110V.a.c. mains model: Pt.No. 210-38
240V.a.c. mains model: Pt.No. 210-39

PSU for Call-back intercom

Power Supply units for permanently wired installations
available in a number of output voltages and wattage ratings.


Page links: Connecting LEADS--- Headset STATIONS--- Loudspeaker STATIONS--- 3-in-1 STATIONS---


Other pages: Home Page--- HEADSETS--- Team Intercom--- Multi-Team Intercom--- Series 210 Intercom---