HEADSET STATIONS: Series 210

Consistent high quality performance irrespective of number of headsets connected


Use these stations in conjunction with stand-alonePower Supplies such as APU 210-30 or FSPS-38 and Loudspeaker Stations such as model LM210-15, to form a complete intercom system.

As extensions to the 3-in-1 base stations, such as model DN802. Or, to extend a chain of stand-alone units.

LINKS to these highlighted items are at the bottom of this page.


Stations for boom-arm and throat microphone headsets


All of these stations provide true duplex conference intercom. High quality speech rendition and consistent performance irrespective of number of headsets connected.



Model 214blank Part No.210-11 Headset STATION CA214



MODEL 214 is tailored to provide headset channels for up to 4 users. Each headset channel may have its' earphone volume level adjusted separately. Leads to headsets may be any length up to 100 metres each.



Model 216-Fblank Part No.210-12 Headset Stn.12-F


MODEL 216-F is of the same design as the CA214 but provides six headset channels. The connections for the headset lines are on the front face, along with the earphone volume controls. Connections for linking to other stations and the power supply module are on the righthand side face.




Model 216-Sblank Part No.210-13 HDSET STN 13: St13B.gif


MODEL 216-S provides the same facilities as station 216-F but features the connections for the headset lines on the side face of the unit. This allows the connections to hang straight down when the station is wall mounted.


Voice-Switch (vox) Stations for air-suit hood integral speakers/microphone are on next page.


For details of connecting leads refer to the Leads page.

Links to other pages:
Loudspeaker Stations----- Headsets----- 3-in-1 Stations----- Team Conference Intercom----- Multi-Team Intercom -----Series 210 Intercom -----Series 92 Stations -----Microphones -----Home Page -----SIGMA:Contact